Introduction

In the intricate and dynamic field of electrical power systems, the ability to accurately model, simulate, and analyze complex behaviors is indispensable for design, operation, and research. From understanding transient stability and power quality issues to integrating renewable energy sources and designing sophisticated control strategies, engineers require powerful and flexible simulation tools. MATLAB/Simulink provides an unparalleled environment for this, combining MATLAB's numerical computing and programming capabilities with Simulink's intuitive graphical interface for multi-domain simulation. This powerful combination allows for the creation of detailed power system components, the development of custom control algorithms, and the comprehensive analysis of system dynamics under various operating conditions and disturbances. Without proficiency in MATLAB/Simulink for Power Systems, electrical professionals would face significant limitations in performing advanced analyses, validating innovative designs, and contributing to the modernization of electrical grids, underscoring the vital need for specialized training in this versatile software. This comprehensive training course focuses on equipping professionals with the expertise to master MATLAB/Simulink for Power Systems.

This training course is meticulously designed to empower electrical engineers, power system analysts, researchers, control system designers, and academics with the theoretical understanding and practical skills necessary to effectively utilize MATLAB/Simulink for Power Systems. Participants will gain hands-on experience in building and simulating detailed power system models using Simscape Electrical (formerly SimPowerSystems), developing custom control strategies, performing various types of dynamic and steady-state analyses, and interpreting complex simulation results. The course will delve into topics such as modeling synchronous and asynchronous machines, designing custom exciters and governors, performing transient stability analysis, simulating power electronic converters (e.g., for HVDC, FACTS, renewables), designing and testing protective relay schemes, and integrating advanced control algorithms for grid support functions. By mastering the principles and practical application of MATLAB/Simulink for Power Systems, participants will be prepared to tackle cutting-edge power system challenges, optimize system performance, accelerate research and development, and contribute significantly to the innovation and resilience of future electrical networks.

Duration: 10 Days

Target Audience

• Electrical Engineers (Power Systems)
• Power System Analysts and Researchers
• Control System Engineers (specifically in Power)
• Renewable Energy Grid Integration Specialists
• Academics and PhD Students in Power Systems
• Consulting Engineers (Power & Utilities)
• R&D Engineers in Power Electronics
• Energy Storage System Developers
• Smart Grid Engineers
• Anyone involved in power system modeling, simulation, and control.

Objectives

• Understand the fundamental concepts of power system modeling using Simulink and Simscape Electrical.
• Learn to navigate the MATLAB and Simulink environments for power system applications.
• Acquire skills in building detailed power system component models (machines, lines, loads).
• Comprehend techniques for performing steady-state and dynamic simulations in Simulink.
• Explore strategies for designing and implementing control systems for power system components.
• Understand the principles of transient stability analysis using Simulink models.
• Gain insights into modeling and simulating power electronic converters for various applications.
• Develop a practical understanding of integrating renewable energy sources into Simulink power system models.
• Learn to perform power quality analysis including harmonics and unbalance.
• Master protective relay modeling and testing within the Simulink environment.
• Acquire skills in utilizing MATLAB scripting for pre-processing, post-processing, and automation.
• Understand the application of phasor-based simulation for larger systems.
• Explore co-simulation techniques with other software.
• Develop proficiency in interpreting complex simulation results and generating reports.
• Prepare to address cutting-edge power system challenges using MATLAB/Simulink.

Course Content

Module 1: Introduction to MATLAB, Simulink, and Simscape Electrical

• Overview of MATLAB and Simulink functionalities for power systems.
• Introduction to Simscape Electrical (formerly SimPowerSystems) library.
• Navigating the Simulink environment: blocks, connections, scopes.
• Basic model building in Simulink.
• Setting up simulation parameters and solver configurations.

Module 2: Basic Power System Component Modeling

• Modeling RLC components (resistors, inductors, capacitors) for AC and DC.
• Ideal and three-phase sources.
• Transmission line and cable models (lumped and distributed).
• Transformer models (two-winding, three-winding, saturation).
• Static and dynamic load modeling.

Module 3: Steady-State Analysis in Simulink

• Power flow analysis using the Powergui block.
• Determining initial conditions for dynamic simulations.
• Calculation of active and reactive power flows.
• Voltage profile analysis.
• Understanding the steady-state report from Powergui.

Module 4: Synchronous Machine Modeling and Control

• Detailed modeling of synchronous generators (dq-axis representation).
• Exciter models (e.g., IEEE Type 1, Type 2, custom designs).
• Governor models (hydro, thermal, gas turbine).
• Power System Stabilizer (PSS) design and integration.
• Simulating generator synchronization and load changes.

Module 5: Asynchronous Machine Modeling and Control

• Modeling of induction machines (squirrel cage, wound rotor).
• Starting methods for induction motors.
• Analyzing motor dynamics during starting and fault conditions.
• Modeling doubly-fed induction generators (DFIG) for wind turbines.
• Control strategies for asynchronous machines.

Module 6: Transient Stability Analysis

• Principles of transient stability: rotor angle and voltage stability.
• Setting up and executing fault simulations.
• Analyzing swing curves, bus voltages, and frequency response.
• Impact of various disturbances (generator trip, line fault).
• Implementing remedial actions for instability.

Module 7: Power Electronic Converter Modeling

• Modeling basic switching devices (diodes, thyristors, IGBTs).
• Rectifier and inverter circuits.
• PWM (Pulse Width Modulation) techniques.
• Introduction to detailed HVDC (High Voltage Direct Current) converter modeling.
• FACTS (Flexible AC Transmission Systems) devices like STATCOM and SVC.

Module 8: Renewable Energy System Integration (Solar PV)

• Modeling of solar PV arrays and MPPT (Maximum Power Point Tracking) algorithms.
• Grid-tied PV inverter models.
• Simulating the interconnection of PV systems to the grid.
• Impact of PV on grid voltage and power quality.
• Grid code compliance studies for PV.

Module 9: Renewable Energy System Integration (Wind Power)

• Modeling of wind turbine generator types (Type 3 DFIG, Type 4 Full Converter).
• Aerodynamic models and pitch control.
• Grid-tied wind turbine inverter models.
• Simulating wind farm operation and grid interaction.
• Impact of wind power variability on grid stability.

Module 10: Protective Relay Modeling and Coordination

• Modeling of various protective relays (overcurrent, differential, distance).
• Setting up relay characteristics in Simulink.
• Simulating fault conditions to test relay operation.
• Time-Current Characteristic (TCC) curve analysis within Simulink (if applicable).
• Basic protection coordination principles.

Module 11: Power Quality Analysis (Harmonics, Unbalance, Flicker)

• Sources of harmonics and their modeling.
• Performing harmonic analysis using FFT (Fast Fourier Transform) tools.
• Analyzing harmonic distortion levels (THD).
• Modeling and mitigation of voltage unbalance and flicker.
• Design of passive and active filters.

Module 12: Advanced Control System Design for Power Applications

• Developing custom control strategies using Simulink control blocks.
• Designing controllers for grid-connected converters (current, voltage control loops).
• Implementing advanced grid support functions (e.g., LVRT, reactive power support).
• Tuning control parameters for optimal performance.
• Integrating control systems with detailed power system models.

Module 13: MATLAB Scripting for Power System Analysis

• Using MATLAB scripts for automated model setup and parameterization.
• Post-processing and analyzing large simulation datasets in MATLAB.
• Generating custom plots and reports from simulation results.
• Performing parametric sweeps and optimization studies.
• Interfacing Simulink models with MATLAB scripts.

Module 14: Phasor-Based Simulation and Co-simulation

• Introduction to phasor simulation for faster analysis of larger systems.
• When to use phasor vs. detailed electromagnetic transient (EMT) models.
• Co-simulation techniques: integrating Simulink with other software.
• Importing external data into Simulink models.
• Real-time simulation concepts for hardware-in-the-loop (HIL).

Module 15: Real-World Case Studies and Advanced Applications

• Application of MATLAB/Simulink for microgrid analysis (grid-connected and islanded).
• Simulating fault ride-through capabilities of renewable energy plants.
• Analyzing power system oscillations and damping.
• Design and validation of energy storage control systems.
• Future trends and research applications in power system modeling.

Training Approach

This course will be delivered by our skilled trainers who have vast knowledge and experience as expert professionals in the fields. The course is taught in English and through a mix of theory, practical activities, group discussion and case studies. Course manuals and additional training materials will be provided to the participants upon completion of the training.

Tailor-Made Course

This course can also be tailor-made to meet organization requirement. For further inquiries, please contact us on: Email: info@skillsforafrica.org, training@skillsforafrica.org  Tel: +254 702 249 449

Training Venue

The training will be held at our Skills for Africa Training Institute Training Centre. We also offer training for a group at requested location all over the world. The course fee covers the course tuition, training materials, two break refreshments, and buffet lunch.

Visa application, travel expenses, airport transfers, dinners, accommodation, insurance, and other personal expenses are catered by the participant

Certification

Participants will be issued with Skills for Africa Training Institute certificate upon completion of this course.

Airport Pickup and Accommodation

Airport pickup and accommodation is arranged upon request. For booking contact our Training Coordinator through Email: info@skillsforafrica.org, training@skillsforafrica.org  Tel: +254 702 249 449

Terms of Payment: Unless otherwise agreed between the two parties’ payment of the course fee should be done 10 working days before commencement of the training.